LAPTOP.png)
DESKTOP
GAMING
PERIPHERAL
PC BUILDER 
BLOGS 
Epson Epson LQ-590IIN Impact dot matrix Printer (24 PIN / Network)
- Brand:Epson
- Product Code:LQ-590IIN
-
$679.00
Printing Technology:
Print Method: Impact dot matrix
Control Panel: 6 switches and 10 LEDs
Print Direction: Bi-direction
Control Code: ESC/P2, IBM PPDS
Number of Pins: 24
Print Speed:
Ultra High Speed Draft:10 cpi: 550cps
High Speed Draft:10 / 12 cpi: 487 / 584 cps
Draft:10 / 12 cpi: 366 / 439 cps
NLQ:10 / 12 cpi: 121 / 145 cps
Reliability:
Printhead Life:400 million strokes / wire
Mean Print Volume Between Failure (MVBF):50 million lines (except print head)
Mean Time Between Failure (MTBF):25,000 Power On Hours (POH) (25% Duty)
Print Characteristics:
Character Sets:
1 Italic and 7 graphical character tables: Italic table, PC437 (US, StandardEurope), PC850 (Multilingual), PC860 (Portuguese), PC865 (Nordic), PC863 (Canadian-French), PC858, ISO 8859-15
Bitmap Fonts:
10, 12, 15 cpi
Scalable Fonts:
Epson Roman / Sans Serif / Roman T / Sans Serif H: 10.5pt., 8pt - 32pt. (every 2pt.)
Barcode:
EAN-13, EAN-8, Interleaved 2 of 5, UPC-A , UPC-E, Code 39, Code 128, POSTNET
Paper Path:
Manual Insertion: Front or Rear in-Top out
Push Tractor: Front or rear in, top out
Pull Tractor: Front, rear or bottom in, top out
Paper Media: Cut Sheet (Single Sheet):
Entry: Front
Length: 100 - 364 mm (3.9 - 14.3”)
Width: 100 - 257 mm (3.9 - 10.1”)
Thickness: 0.065 - 0.14 mm (0.0025 - 0.0055”)
Entry: Rear
Length: 100 - 364 mm (3.9 - 14.3”)
Width:100 - 257 mm (3.9 - 10.1”)
Thickness: 0.065 - 0.14 mm (0.0025 - 0.0055”)
Cut Sheet (Multi-part Forms):
Entry: Front
Length: 100 - 364 mm (3.9 - 14.3”)
Width: 100 - 257 mm (3.9 - 10.1”)
Thickness: 0.12 - 0.46 mm (0.0047 - 0.018”)
Copies: 1 Original + 5 copies
Continuous Paper (Single Sheet / Multi-part):
Entry: Front, Rear, Bottom
Length: 101.6 - 558.8 mm (4.0 - 22.0”)
Width: 101.6 - 254 mm (4.0 - 10.0”)
Thickness: 0.065 - 0.49 mm (0.0025 - 0.019”)
Copies: Original + 6 copies
Envelope (No.6):
Entry: Rear
Length: 92mm (3.6”)
Width: 165mm (6.5”)
Thickness: 0.16 - 0.52 mm (0.0063 - 0.0205”)
Envelope (No.10):
Entry: Rear
Length: 105mm (4.1”)
Width: 241mm (9.5”)
Thickness: 0.16 - 0.52 mm (0.0063 - 0.0205”)
Label (Base Sheet):
Entry: Bottom
Length: 101.6 - 558.8 mm (4.0 - 22.0”)
Width: 100 - 148 mm (3.9 - 5.8”)
Thickness: 0.16 - 0.19 mm (0.0063 - 0.0075”)
Card:
Entry: Front, Rear
Length: 100 - 148 mm (3.9 - 5.8”)
Width: 100 - 148 mm (3.9 - 5.8”)
Thickness: 0.22mm (0.0087”)
Roll Paper:
Entry: Rear
Diameter: 127mm (5”)
Width: 216mm (8.5”)
Thickness: 0.07 - 0.09 mm (0.0028 - 0.035”)
Line Spacing:
4.23mm (1/6”) or programmable in increments of 0.0706mm
Interface:
USB 2.0, Bi-directional parallel (IEEE-1284 nibble mode supported), Serial, 100base-Tx wired LAN
Related Products
Tags: Printer, LQ-590, 24 PIN, Network
Home Banner Full Width 1 (CMS)
